the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2002 civic problem remote starting


Post ReplyPost New Topic
< Prev Topic Next Topic >
jheaman 
Member - Posts: 5
Member spacespace
Joined: March 16, 2009
Location: Alberta, Canada
Posted: March 19, 2009 at 8:10 PM / IP Logged  
I have a prostart 3471TW & ADS-DLSL HA bypass module. When attempting to remote start, I get a 12V reading on the ignition wire but nothing on the starter wire. It will not even crank. The lights flash 3 times after failing, which doesn't mean anything relevant according to the manual. Anyone have ideas?
91stt 
Silver - Posts: 564
Silver spaceThis member consistently provides reliable informationspace
Joined: May 24, 2006
Location: New Jersey, United States
Posted: March 19, 2009 at 9:41 PM / IP Logged  
check to make sure the system is not in valet mode. in valet mode the lights flash once - pause - 2times.
jheaman 
Member - Posts: 5
Member spacespace
Joined: March 16, 2009
Location: Alberta, Canada
Posted: March 20, 2009 at 1:41 AM / IP Logged  
not in valet mode. It flashes three times slowly, no pauses :S
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: March 20, 2009 at 9:45 AM / IP Logged  
Is this the car's starter wire or the R/S is this a manual  with a clutch switch?  Try it with the key in the ignition, short of R/S failure or fuse blow check them, on the starter input it does sound like by-pass failure.
moonliter 
Copper - Posts: 322
Copper spacespace
Joined: February 28, 2007
Location: Canada
Posted: March 20, 2009 at 10:49 AM / IP Logged  

3 slow flashes = the module did not detect a tach signal.

Make sure you connect the right tach wire ( blue ) the tach programming before attempt a remote start.

I would do the take over test. Start the car with the key as usual, while the car is running, press start on your remote, wait till you hear a couple of clicks from the rs unit, remote the key. If the car stays running then you know that you had the right tach signal and of course, the bypass is also working.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer