Relay help!!!

Home / the12volt's Install Bay / Relays / Relay help!!! (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

RaveChild

Copper - Posts: 54

Joined: March 05, 2003

Location: Canada

Posted: March 22, 2003 at 2:25 PM / IP Logged

can anyone tell me how to wire a relay for my remote trunk release.

it is a 1996 sunfire gt and the alarm is an autopage rs750

i know that the trunk release is the BLACK/ white wire in the keyless module and that the grey wire is the wire i need from the alarm, but i dont know how to wire the relay to make it work.

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: March 22, 2003 at 4:34 PM / IP Logged

yea thats easy you have to determine wether the truck release on the car is positive or negative . if it is pos than you need to take the relay and set it up like this

pin 86 and 87 give constant 10 amp fused power.

87a not used

pin 85 is the negative trigger from the alarm one of the channels on the alarm to control the relay. and pin 30 is the wire you connect to the truck wire of the car

your done

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Relay help!!!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.