automate 7

Home / the12volt's Install Bay / Car Security and Convenience / automate 7 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

harrisell1

Copper - Posts: 93

Joined: July 22, 2004

Location: United States

Posted: April 01, 2009 at 9:11 PM / IP Logged

This is the problem that just occurred. I have an 04 Yukon Denali with the automate 7 both remotes will not respond unless

I'm just about up on the car. Batteries were replaced, still the same problem. It sounds like something on the antenna or

something. This just all of sudden started happening.

Thanks in advance.

electronics

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: April 02, 2009 at 6:42 AM / IP Logged

I had an Avalon that had the same issue and the AM7 had to be replaced....

Mike M2

Tech Manager

CS Dealer Services

Back to Top

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: April 02, 2009 at 9:23 AM / IP Logged

I can't remember, but I think I saw a bad antenna do that once.

It could never hurt to unplug the antenna for a few minutes and plug it back in. See if that does anything.

Back to Top

harrisell1

Copper - Posts: 93

Joined: July 22, 2004

Location: United States

Posted: April 02, 2009 at 10:25 PM / IP Logged

Now for some reason the remotes are working like nornal. I didn't do anything to the car.

I will unplug and plug the antenna back in just to make sure it's seated. I've had it on the

car for five years with no problem at all until recently. I guess it's due for something to happen.

electronics

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

automate 7

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.