the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote start, 98 mustang 5 speed


Post ReplyPost New Topic
< Prev Topic Next Topic >
radodreams 
Member - Posts: 4
Member spacespace
Joined: April 02, 2009
Location: California, United States
Posted: April 02, 2009 at 6:44 PM / IP Logged  
i just purchased a xpresskit pkall remote starter for my 5 speed 98 mustang gt and im so lost on the wiring  can someone please help me i cant even read the instructions.
shaip99 
Copper - Posts: 112
Copper spacespace
Joined: May 04, 2005
Location: Canada
Posted: April 02, 2009 at 9:41 PM / IP Logged  

i looked up the manual for that bypass

if you look at the install guide your supposed to use connection 1 that is the wiring for your car its on page 4 of the manual

power, and ground are in the 4 pin plug black and blue cut off the other side of them unless you have a d2d remote starter 

gwr, ignition and your data rx and tx wires are in the larger plug you dont need the other wires

the imobilizer plug is shown in the install manual it will be by the ignition harness of the vehicle

"Computer games don't affect kids, I mean if Pac Man affected us as kids, we'd
all run around in a darkened room munching pills and listening to repetitive
music."-Kristian Wilson, Nintendo Inc.
radodreams 
Member - Posts: 4
Member spacespace
Joined: April 02, 2009
Location: California, United States
Posted: April 02, 2009 at 10:15 PM / IP Logged  
shaip99 wrote:

i looked up the manual for that bypass

if you look at the install guide your supposed to use connection 1 that is the wiring for your car its on page 4 of the manual

power, and ground are in the 4 pin plug black and blue cut off the other side of them unless you have a d2d remote starter 

gwr, ignition and your data rx and tx wires are in the larger plug you dont need the other wires

the imobilizer plug is shown in the install manual it will be by the ignition harness of the vehicle

Thank you so much for respondind.what do you mean cut off the other side of them?what does gwr stand for?so I splice the ignition data rx and tx wires?what wires do I splice them into?
shaip99 
Copper - Posts: 112
Copper spacespace
Joined: May 04, 2005
Location: Canada
Posted: April 02, 2009 at 10:32 PM / IP Logged  

not trying to be rude but you dont seem to have a basic understanding of car starters i would highly suggest you go to a shop to install this

there is alot you need to do for this vehicle like diode isolating the door pins, finding ebrake, mounting hood pin,  tach wires, ignition wires, brake, parklight, not to mention the possibility of having to use relays to 5 wire the door locks on some cars

you cant just guess with these wires you have to have a multimeter to test them all

and worst of all if you connect the bypass wires wrong you can toast the immobilizer which will cost you alot more than what a professional install will cost you

a good install shop will cost you a couple hundred bucks while a bcm will cost you up to a few grand for parts and labour its just not worth it

"Computer games don't affect kids, I mean if Pac Man affected us as kids, we'd
all run around in a darkened room munching pills and listening to repetitive
music."-Kristian Wilson, Nintendo Inc.
radodreams 
Member - Posts: 4
Member spacespace
Joined: April 02, 2009
Location: California, United States
Posted: April 03, 2009 at 12:22 AM / IP Logged  
yes you are right but i honestly dont have any money right now and this is the only way i can get my mustang running again.someone recently tried stealing my mustang and i had to get it towed to the dealership and got it hooked up on the obc scan and i since have fixed all the problems besides the pats code.this is the only way i can bypass the pats system is through this device.if you can give me some guidance i would really appreciate it.im willing to listen if your willing to help
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: April 03, 2009 at 2:22 AM / IP Logged  
Please please do not attempt this by your self, we don't have enough time to explain your questions so that when we answer you understand.  If the car is running,  wait till you can afford to have it done professionally.  It will cost you a hell of a lot less that way.
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: April 03, 2009 at 10:30 AM / IP Logged  
shaip99 wrote:

not trying to be rude but you dont seem to have a basic understanding of car starters i would highly suggest you go to a shop to install this

Thank you.....

robertsc 
Copper - Posts: 337
Copper spacespace
Joined: December 21, 2007
Location: Ontario, Canada
Posted: April 03, 2009 at 12:24 PM / IP Logged  
If your pats system has something wrong with it a bypass will not fix it.
radodreams 
Member - Posts: 4
Member spacespace
Joined: April 02, 2009
Location: California, United States
Posted: April 03, 2009 at 12:41 PM / IP Logged  
robertsc wrote:
If your pats system has something wrong with it a bypass will not fix it.
 
the problem was fixed with the pats system.the tech did another scan on it and he said he needs to get an older computer to reset the code for the pats but this was 2 months ago.i was reading online and saw that if i put this xpresskit pkall data immobilizer override it will bypass the pats.I was a buddy that does car audio coming over to install this any tips or help for him?
shaip99 
Copper - Posts: 112
Copper spacespace
Joined: May 04, 2005
Location: Canada
Posted: April 03, 2009 at 2:03 PM / IP Logged  

ya it will temporaraly bypass the pats sytem under remote start you will not be able to bypass it completely if you try to do that you will lock yourself out of the vehicle

if the pats sees two keys one from the bypass and one from the key you are trying to put into the cylinder to start the car it wont start that is part of the pats system

therefor what you are trying to do will not work

"Computer games don't affect kids, I mean if Pac Man affected us as kids, we'd
all run around in a darkened room munching pills and listening to repetitive
music."-Kristian Wilson, Nintendo Inc.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer