remote start fails to read tach sig

Home / the12volt's Install Bay / Car Security and Convenience / remote start fails to read tach sig (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hedgehawg41

Member - Posts: 7

Joined: April 05, 2009

Location: Kansas, United States

Posted: April 05, 2009 at 10:11 PM / IP Logged

96 chevy 1ton 4 dr w/valiant rs130 door locks,horn,lights all work programing,hoodpin,all work all wiring double checked 2nd pink/wight ign wired but during tach programing it continues to fail to read signal remote starts but willnot run i,m experienced mechanic but new to electronics this is my truck thanks for any or all advice in advance nubee to site but great source to see peaple helping peaple

robertsc

Copper - Posts: 337

Joined: December 21, 2007

Location: Ontario, Canada

Posted: April 06, 2009 at 7:36 AM / IP Logged

Thats the number one reason i only put viper starters in.

I have been there more than once its not fun.

Last one i did was a ford one for a ford dealership and it was a waste of 5-6 of my life.

hedgehawg41

Member - Posts: 7

Joined: April 05, 2009

Location: Kansas, United States

Posted: April 06, 2009 at 7:46 AM / IP Logged

yeh ,i realized my mistake when i opened the box , wished i would have joined this site first another lesson in you get what you pay for

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: April 06, 2009 at 8:04 AM / IP Logged

Where did you get your tach signal from?

Have you programmed the tach signal?

Kevin Pierson

hedgehawg41

Member - Posts: 7

Joined: April 05, 2009

Location: Kansas, United States

Posted: April 06, 2009 at 8:15 AM / IP Logged

ive tried both the tach wht wire and the black #1 injector wire truck operates normal w/ key but r/s fails to accept signal

KPierson

Platinum - Posts: 3,527

Joined: April 14, 2005

Location: Ohio, United States

Posted: April 06, 2009 at 8:32 AM / IP Logged

Are you sure it's a tach issue and not a security issue?

What happens if you start the car with the key, remote start it while it is running, and then remove the key? Does it die right away or keep running?

Kevin Pierson

hedgehawg41

Member - Posts: 7

Joined: April 05, 2009

Location: Kansas, United States

Posted: April 06, 2009 at 9:03 AM / IP Logged

not sure of security issue i'll try it with the key but when i try to program the tach read 1 flash is accepted 5 flashes failed to read tach signal and it alwayes tells me it failed to readtach

hedgehawg41

Member - Posts: 7

Joined: April 05, 2009

Location: Kansas, United States

Posted: April 06, 2009 at 10:17 AM / IP Logged

hey guys thanks for taking your time to help out just called icdynamics and was told i have abad unit so i think i will send it back with a detailed description of what i think of icdynamics and what they should do with the unit.it'stime to get a quality system thanks again-greit site looking forward to partisipating again in the future

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start fails to read tach sig

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.