ignition wiring - help asap

I'm trying to hook up a crimestopper alarm/remote start in a 94 civic. My ignition has 3 positions.

1. Acc2. Run3. StartMy ignition switch wiring is:Blk/wht - Hot in startBlk/yel - Hot in run and startWht/blk - Hot in acc and runYel - Hot in runMy alarm has a wire for:start - i'll hook to blk/whtign - i'll hook to blk/yelacc - where does this go? I thougt wht/blk.  Install guide on this site says yel.

then it has one more for "ign2 or acc2 if necessary"

Do I need to hook this up or is it for a car with an ignition switch with another position?If I do, where does it go?

Also, the alarm has two wires for battery power.  Should I run those directly to the battery or can I hook them to the constant power wire in my ignition switch.

Any help is greatly appreciated.

here is the wiring info:constant power-white(yes you can hook your power wires to this)starter-BLACK/ whiteignition-BLACK / YELLOWaccessory-yellowlock-GREEN / WHITEunlock-GREEN/ redparking lights-RED / blackdoor trigger-lt.GREEN/ redtach-blue(two pin connector under hood near batt)brake-GREEN / WHITEdont worry about the other teo wires for acc/2 and ign/2