1 ohm amp

Home / the12volt's Install Bay / Car Audio / 1 ohm amp (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

nvisible1

Member - Posts: 31

Joined: March 25, 2009

Location: Oklahoma, United States

Posted: May 24, 2009 at 7:35 PM / IP Logged

sacheat wrote:

alaisneo wrote:

sorry auto spell check thing sux..i just let it do its thing....well did you find your INDEPENDENCE "impedance" yet?...you have to know this or you could put major stress on your amp.

They are four ohm coils. I know how to wire the speakers, it's just that I've heard that 1 ohm even if the amp is stable at 1 ohm can be dangerous to the amp and it will need alot more power to run it.

well, whats the best way to wire subs on a 1 ohm stable amp so it will pound real nice and good?, i got Dual 4 ohm voice coil 15's...

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: May 24, 2009 at 7:55 PM / IP Logged

I can only assume that you have 2 woofers. If so here are your options.

Option 1 (parallel/parallel) = 1 ohm load

Voice coils wired in parallel, speakers wired in parallel

Recommended Amplifier: Stable at 1 ohm mono

1 ohm amp - Page 2 - Last Post -- posted image.

Option 2 (series/parallel) = 4 ohm load

Voice coils wired in series, speakers wired in parallel

Recommended Amplifier: Stable at 4, 2, or 1 ohm mono

nvisible1

Member - Posts: 31

Joined: March 25, 2009

Location: Oklahoma, United States

Posted: May 24, 2009 at 10:06 PM / IP Logged

yes, just 2 woofers, will they sound the same if i try both ways?....

alaisneo

Member - Posts: 27

Joined: May 18, 2009

Location: New York, United States

Posted: May 24, 2009 at 10:11 PM / IP Logged

It will not be as loud at 4 ohm...It will put less stress on the amp..however 1 ohm will be much louder but will put stress on the amp..but if its stable at 1 ohm you will be fine...as far as distortion at both ohm loads im not sure....you will just have to try it

I love sound

nvisible1

Member - Posts: 31

Joined: March 25, 2009

Location: Oklahoma, United States

Posted: May 24, 2009 at 10:59 PM / IP Logged

alaisneo wrote:

oh yea, i got a planet audio apocalypse 1500d, it is 1 ohm stable, i guess ill stick with 1 ohm...my amp doesnt get that hot with my gains how they are now so it should be good...

alaisneo

Member - Posts: 27

Joined: May 18, 2009

Location: New York, United States

Posted: May 24, 2009 at 11:04 PM / IP Logged

yea you don't want it to get hot that's for sure..you will lose alot of power that way. Buts its always fun to hook them up all kinds of ways...

I love sound

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1 ohm amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.