alarm not working properly

a dmm is a digital multimeter. at the hood pin most of them has the wire just put on with a spade connectors if no probably just cut it in the best place that you will be able to hook it back up . If the hood is flashing on the remote there is a problem with the hoodpin. I usually run mercury switches and if it is not ground correctly then it will give you a problem. Just look to see that it is contacting the hood and that it is connected in the right way.

lucasoil4u wrote: a dmm is a digital multimeter. at the hood pin most of them has the wire just put on with a spade connectors if no probably just cut it in the best place that you will be able to hook it back up . If the hood is flashing on the remote there is a problem with the hoodpin. I usually run mercury switches and if it is not ground correctly then it will give you a problem. Just look to see that it is contacting the hood and that it is connected in the right way.

a couple of days ago i unplugged the socket from the main bain with all the wires in which the pin switch wire is and then plugged back in, but nothing happened. would it be different from what i did to cut and put back together the pin switch wire