hooking up viper 5002 to locks

Home / the12volt's Install Bay / Car Security and Convenience / hooking up viper 5002 to locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: June 04, 2009 at 7:11 PM / IP Logged

yes that's what you are doing, connect the GREEN/ black and blue/black to all actuators incorporated in the system, eliminate the locking modulem do NOT connect it, it will cause problems, just go directly to the actuatores

tak4

Copper - Posts: 76

Joined: January 31, 2008

Location: Hawaii, United States

Posted: June 04, 2009 at 7:15 PM / IP Logged

ok so dont connect the the relay module? Will my poer locks still work from the inside? when i use the lock and unlock switch? How will the power locks get power when not connected to the relay? power threw the Viper module?

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: June 04, 2009 at 7:20 PM / IP Logged

now you didn't say anything about a switch, did you, if you wan to work and interior rocker switch then you have to go back to the way you had it originally, which is negative pulse via the mes module,

tak4

Copper - Posts: 76

Joined: January 31, 2008

Location: Hawaii, United States

Posted: June 04, 2009 at 7:22 PM / IP Logged

oh ok, do you know how come the relay makes noise and doesnt want to work? i was told that its not borken but something is lose or disconnected.

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: June 04, 2009 at 7:25 PM / IP Logged

you'll have to take a meter to verify all the wires a reading as they should, it really is difficult for me to tell you from behind my pc,

tak4

Copper - Posts: 76

Joined: January 31, 2008

Location: Hawaii, United States

Posted: June 04, 2009 at 7:26 PM / IP Logged

should all the wires read 12v? I can go out and test them all now.

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: June 04, 2009 at 7:39 PM / IP Logged

follow the manual, it will tell you accordingly, and no all wires should not be reading twelve volts.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

hooking up viper 5002 to locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.