leds

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / leds (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

mag63

Copper - Posts: 52

Joined: July 30, 2007

Location: Australia

Posted: June 25, 2009 at 6:55 AM / IP Logged

mag63 wrote:

i am an idiot wrote:

Was there any difference between one resistor and the 3 in series? If it did make a difference but it was only a minor difference, try a 2.2K or a 3.3K. If you had 3 of the 328 ohm resistors in series, you had a total of 984 ohms. or basically 1K. If it is a task to get to the parts store, get several values between 2.2K and 10K.

OK I'm off to the store and get what suggested and will try that..

Be back with some news leds - Page 2 -- posted image.

All done and works fantastic, ended up being the 10K that worked the best...

There's a Photo if anyone wants to see the set up leds - Page 2 -- posted image.

Thanks to i am an idiot leds - Page 2 -- posted image.

I use to be confused but now I'm not so sure:)

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 25, 2009 at 7:58 AM / IP Logged

Looks as though my initial suggestion for 300 Ohms might have been off by just a bit. Sorry you had to make so many trips to the parts store, and we always like pictures. They're easier than reading.

Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Back to Top

mag63

Copper - Posts: 52

Joined: July 30, 2007

Location: Australia

Posted: June 29, 2009 at 8:29 AM / IP Logged

i am an idiot wrote:

Looks as though my initial suggestion for 300 Ohms might have been off by just a bit. Sorry you had to make so many trips to the parts store, and we always like pictures. They're easier than reading.

Forgot to add the pics so here there are leds - Page 2 -- posted image.

I use to be confused but now I'm not so sure:)

Back to Top

i am an idiot

Platinum - Posts: 13,670

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 29, 2009 at 8:58 AM / IP Logged

Bad news: You forgot them again.

Back to Top

mag63

Copper - Posts: 52

Joined: July 30, 2007

Location: Australia

Posted: June 29, 2009 at 10:21 PM / IP Logged

i am an idiot wrote:

Bad news: You forgot them again.

I use to be confused but now I'm not so sure:)

Back to Top

mag63

Copper - Posts: 52

Joined: July 30, 2007

Location: Australia

Posted: June 29, 2009 at 10:50 PM / IP Logged

I use to be confused but now I'm not so sure:)

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

leds

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.