Posted: June 20, 2009 at 8:13 PM / IP Logged
Posted: June 20, 2009 at 8:15 PM / IP Logged
Posted: June 20, 2009 at 8:17 PM / IP Logged
Posted: June 20, 2009 at 9:22 PM / IP Logged
Posted: June 21, 2009 at 4:32 PM / IP Logged
Posted: June 21, 2009 at 5:25 PM / IP Logged
Posted: June 21, 2009 at 5:45 PM / IP Logged
Posted: June 21, 2009 at 6:26 PM / IP Logged
Posted: June 21, 2009 at 8:30 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version

| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com
Wednesday, November 26, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Wednesday, November 26, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.




The car had or has been running fine and the stereo, well "Steller" will do for now on the stereo. So, I wanted to go to this car show so I re- ran most of the wiring to make it look presentable and hooked the battery up put in the key, turned a couple of clicks and....
Suprise: The radio and amps worked great!
Then, I cranked it up and it turns right over and then immediatly goes dead. It does stay running if I apply a very small amount of gas but, of course I had to ride the break all the way home from my friends garage. I had the battery checked: it's 100% and was new anyways as is the alternator which I tested with my neighbor and a voltmeter to see if it was over or under charging and it stayed right in rand w/ any and everything going and my buddy throttling the engine slightly. I checked every ground a circuit I put in and it has 0 voltage loss. I though maybe I pulled something loose from a previous alarm install from a shop but, I am @ a total lose...
Any person will and idea or question please feel free to help out. I would greatly appreciate it.


