pioneer remote trigger problem

Home / the12volt's Install Bay / Car Audio / pioneer remote trigger problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

belalegosi

Member - Posts: 19

Joined: June 23, 2009

Posted: June 24, 2009 at 12:22 PM / IP Logged

Thanks.

I'll just wait for the part and see if it works. If it dont, I'll take a picture of it for others to reference it as counterfeit

belalegosi

Member - Posts: 19

Joined: June 23, 2009

Posted: July 11, 2009 at 1:40 PM / IP Logged

Well I installed the part I bought over ebay.

Its a counterfeit :(

The remote trigger still does not work so now I'm in the same boat again.

I find it hard to put out $40 for a chip on a deck I got for $60 new.

Is there anyway to suppress the noise coming from the accessory line?

I was thinking the use of some sort of inductor inline with the remote trigger wire. Would that work?

i am an idiot

Platinum - Posts: 13,722

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 11, 2009 at 10:21 PM / IP Logged

You need to install a switch on the wire so you can turn it off manually if the radio is off.

yimke

Copper - Posts: 417

Joined: June 23, 2009

Location: Nebraska, United States

Posted: July 13, 2009 at 1:10 PM / IP Logged

Did you disconnect your blue/white wire away from the remote wire lead and test your voltage output from the back of the deck?

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pioneer remote trigger problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.