mdf core red oak enclosure?

Home / the12volt's Install Bay / Car Audio / mdf core red oak enclosure? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

thatfloorguy

Copper - Posts: 95

This member has made a donation to the12volt.com. Click here for more info.

Joined: May 14, 2009

Location: Ohio, United States

Posted: June 27, 2009 at 10:35 AM / IP Logged

I am thinking of going a little bigger also. Kicker's 6 CF is actually 6.525 w/port. I can get that with 34Wx17Hx24D They have the port tuned@30hz tho. For spl do I want to tune it higher? What would you reccomend as far as the port? It cannot not exceed 15.5 high, that is the max.I came up with 5.975 including sub/brace displacement, another .86 for the port (3 5/8x15 1/2x22) for a total of 6.525 CF but again that is tuned@ 30hz. (08s15L74 wired to 2 08zx750.1) Will this design produce the sound I am looking for or does the port need reconfigured?

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mdf core red oak enclosure?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.