idatalink ch4

Home / the12volt's Install Bay / Car Security and Convenience / idatalink ch4 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

racing_bidule

Copper - Posts: 66

Joined: December 13, 2007

Location: Quebec, Canada

Posted: July 02, 2009 at 1:18 PM / IP Logged

iDatalink is proud to announce you the release of its new ADS-AL(DL) CH4 Firmware.

This new firmware covers ALL the Chrysler / Dodge / Jeep TIP START vehicles WITHOUT having to go in the ignition switch.

The module programs using only one key and doesn't require the use of a Chrysler transponder.

WE CRACKED IT.

Have fun!!!

If you fail on your first attempt, at least destroy all evidence you tried!

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: July 02, 2009 at 4:58 PM / IP Logged

SWEET !!

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

racing_bidule

Copper - Posts: 66

Joined: December 13, 2007

Location: Quebec, Canada

Posted: July 02, 2009 at 8:00 PM / IP Logged

It's unbeliveable how quick and easy it is to install.

It also offers a bullet proof take over without any shutdown...

Check the install guide;

BLADE: http://www.idatalink.com/source/viewDoc.php?id=988

ADSS_AL CA: http://www.idatalink.com/source/viewDoc.php?id=987

If you fail on your first attempt, at least destroy all evidence you tried!

realsnake

Member - Posts: 18

Joined: December 07, 2007

Location: British Columbia, Canada

Posted: July 05, 2009 at 10:13 PM / IP Logged

I did an install in 12 minutes on a Charger 2009 this weekend. You guys at idatalink rock.

High hat to the whole idatalink team.

A satisfied customer who will never go back to his old brands.

jim hunter

Silver - Posts: 351

Joined: March 23, 2006

Location: United States

Posted: July 06, 2009 at 2:42 PM / IP Logged

? whats the purpose of giving us the left front door wire color and location yet not show a wire from starter or idatalink module going to the door? was this originally gonna shut down upon dr door opening?

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: July 06, 2009 at 5:41 PM / IP Logged

RAP shutdown.

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

jim hunter

Silver - Posts: 351

Joined: March 23, 2006

Location: United States

Posted: July 06, 2009 at 9:57 PM / IP Logged

rap shutdown would make sense_if they had a wire from the idatalink module going to the door pin wire in the installation instructions, they show no wire going to this left front door(drivers) pin

racing_bidule

Copper - Posts: 66

Joined: December 13, 2007

Location: Quebec, Canada

Posted: July 17, 2009 at 4:17 PM / IP Logged

I hear you, we will add it to the install guide:

Rearm from the remote starter = Driver doorpin for RAP on select vehicles

Your feedbacks are always appreciated, thanks guys.

Regards!

If you fail on your first attempt, at least destroy all evidence you tried!

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

idatalink ch4

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.