amp load

Home / the12volt's Install Bay / Car Audio / amp load (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rb1970

Member - Posts: 2

Joined: July 12, 2009

Location: North Carolina, United States

Posted: July 12, 2009 at 1:48 PM / IP Logged

2/4ohm dvc subs wired parallel into 2 channels, whats the load on the amp?

Rodney Brendle

Back to Top

richardparker

Member - Posts: 16

Joined: July 11, 2008

Posted: July 12, 2009 at 2:04 PM / IP Logged

Are you going to run 1 sub from each channel?If you are...It will be 2ohms each channel.If bridging it with both subs running ..It with be 1 ohm. I dont know too many 2channels bridged that can do 1ohm

Back to Top

i am an idiot

Platinum - Posts: 13,671

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 12, 2009 at 2:05 PM / IP Logged

If you have (2) 4 ohm dvc subs, and you parallel the coilsof one woofer and connect that woofer to one channel of the amp, and do the same for the other speaker and other channel. This would be considered a 2 Ohm stereo Load.

Back to Top

rb1970

Member - Posts: 2

Joined: July 12, 2009

Location: North Carolina, United States

Posted: July 13, 2009 at 3:33 PM / IP Logged

thanks,you answered my question.

Rodney Brendle

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp load

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.