2005 murano passenger door lock blown

Home / the12volt's Install Bay / Car Security and Convenience / 2005 murano passenger door lock blown (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

shadowinfector

Copper - Posts: 199

Joined: October 02, 2003

Posted: July 26, 2009 at 6:53 PM / IP Logged

the passenger door lock is not working properly, i think the actuator is gone, can I wire up an after market actuator to the stock wiring without going through the door boot? I have an aftermarket alarm/rs with keyless.....has anyone done this? wiring aftermarket actuator to stock wiring to keep stock functions? let me know thanks

Back to Top

Search for other posts by shadowinfector

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: July 26, 2009 at 7:16 PM / IP Logged

you have to verify with a meter firstly to ensure it is the actuator and not the wiring, once you are getting voltage at the motor wires, then you can go ahead and use an aftermarket actuator and connect it to the motor wires.

commit your way to jehovah and he will act in your behalf. psalms 37:5

Back to Top

shadowinfector

Copper - Posts: 199

Joined: October 02, 2003

Posted: July 26, 2009 at 7:46 PM / IP Logged

all the other door lock and unlocks properly when button pushed with aftermarket alarm. the passenger door lock moves very little and moves about half way, ...

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: July 27, 2009 at 3:30 PM / IP Logged

you will still have to verify that the motor is recieving sufficient voltage, i would lean towards the actuator being defective but you still have to meter it to be sure.

commit your way to jehovah and he will act in your behalf. psalms 37:5

Back to Top

shadowinfector

Copper - Posts: 199

Joined: October 02, 2003

Posted: August 12, 2009 at 9:09 AM / IP Logged

does anyone happen to have the door lock assembly diagram or door assembly diagram? i need to know if the door locks/actuators are cable type.....also the wiring diagram for the door lock switch if possible....any help thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 murano passenger door lock blown

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.