the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007 jeep wrangler transponder bypass


Post ReplyPost New Topic
< Prev Topic Next Topic >
domenic73 
Member - Posts: 4
Member spacespace
Joined: January 05, 2006
Location: United States
Posted: July 26, 2009 at 8:06 PM / IP Logged  

I've installed a Viper 5701 alarm with remote starter in a 2007 Jeep Wrangler Unlimited.  I used the DLPKKICH3 to bypass the transponder.  I followed the M2 installation type but I am unable to find any wires matching the CAN Low and CAN High wires.  The manual shows them as a twisted pair that are White (or WHITE/ Pink) and WHITE/ Orange located in the kick panel.  There is nothing in the kick panel even remotely matching the wires.  Has anyone done this type of bypass in this vehicle?  If not, can someone tell me how to test or find these wires?

Thank you,

Dom V

Dom V
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: July 27, 2009 at 11:01 AM / IP Logged  
canH- WHITE/ black
canL- WHITE/ lt. blue
located at the immobilizer transceiver, at key cylinder.
look on idatalink.com under support and installation manual. look in document ADS-DLSL-CH3, page 13
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
domenic73 
Member - Posts: 4
Member spacespace
Joined: January 05, 2006
Location: United States
Posted: August 07, 2009 at 11:56 AM / IP Logged  
Ok, so I was able to find those wires and connect to them.  The only problem that I am having is that the truck will not remote start unless I am in it and pressing the clutch while it's starting.  Otherwise it will not crank.  Does anyone know if I need to bypass the clutch or should I be using another starter wire other then the negative trigger wire on the ignition harness?
Dom V

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer