the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 matrix xr starter


Post ReplyPost New Topic
< Prev Topic Next Topic >
ryoder 
Member - Posts: 10
Member spacespace
Joined: December 01, 2002
Location: New Hampshire, United States
Posted: August 02, 2009 at 6:01 PM / IP Logged  
I recently installed a compustar remote start with Key-override-all bypass on a 2005 Matrix, and am having problems with the bypass unit. Specifically, the unit programs, but fails to bypass the transponder (inserting a key into the ignition allows the car to remote start). The connector diagram in the Fortin manual shows only one empty pin (#3), but my 7-pin connector only has 3 wires (and 4 empty slots)! Does anyone know the correct colors of the car's wires for the Rx and Tx connections? I am unable to determine which wires are the #4 and #5 wires, given that no indication is provided for the #1 pin.
Thank you.
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: August 02, 2009 at 8:54 PM / IP Logged  
pin 4 blue: code
pin 5 green: tx
got it from idatalink.com
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
ryoder 
Member - Posts: 10
Member spacespace
Joined: December 01, 2002
Location: New Hampshire, United States
Posted: August 03, 2009 at 5:44 AM / IP Logged  
Thank you--I will try these wires asap.
Ryan

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, September 25, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer