momentary p/b start and stop 1st post

Home / the12volt's Install Bay / Relays / momentary p/b start and stop 1st post (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

miniboy

Member - Posts: 10

Joined: September 07, 2009

Posted: May 05, 2010 at 9:37 AM / IP Logged

momentary p/b start and stop 1st post - Page 3 -- posted image.

sup22

Member - Posts: 7

Joined: May 04, 2010

Location: Arizona, United States

Posted: May 05, 2010 at 9:43 AM / IP Logged

Thank you miniboy

borischan

Member - Posts: 5

Joined: February 26, 2010

Posted: May 05, 2010 at 10:56 PM / IP Logged

Thanks a lot miniboy, I'll check it out when I have a chance and post a reply.

Main difference I have is I'm using the 5 relays for latching (without diodes), and I get relay chattering making it difficult to switch off. Maybe I need to change to your latching set up (or different relays).

Your set up looks good in the video

boris

sup22

Member - Posts: 7

Joined: May 04, 2010

Location: Arizona, United States

Posted: May 06, 2010 at 6:16 PM / IP Logged

borischan - let me know how it works out for you.

I can't get it, and keep blowing fuses. I've triple and quadruple checking the wiring.

miniboy

Member - Posts: 10

Joined: September 07, 2009

Posted: May 06, 2010 at 7:35 PM / IP Logged

Sup22 Are your diodes in the right way?

sup22

Member - Posts: 7

Joined: May 04, 2010

Location: Arizona, United States

Posted: May 07, 2010 at 11:18 AM / IP Logged

Uh...derrrr..... my diodes were in backwards. Thanks mini

Ok, switched the orientation of the diodes and now have 2 new issues. Could the backwards diodes created a problem or bad relay(s)?

1. Latching won't work. The acc's will power while the button is depressed, but not stay on.

2. Chattering relays (relays are Tyco VF4-45F11)

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

momentary p/b start and stop 1st post

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.