SPL Enclosure for Dual Memphis Mojo 15’s

Home / the12volt's Install Bay / Car Audio / SPL Enclosure for Dual Memphis Mojo 15’s

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jpinusmc

Member - Posts: 22

Joined: July 21, 2003

Location: California, United States

Posted: September 08, 2009 at 11:05 PM / IP Logged

All,

My buddy and I are trying to build an spl enclosure for his ancient dodge colt. max specs are 36 1/2" wide x 28 3/4" high and 36" deep.

We have two of the memphis m3 mojo 15's with dual 2 ohm voice coils powered by two (2) mtx elite 4100d amps. Looking to tune around 50ish hz for 5 second burps, no music.

listed below are the specs for the subs I have been able to find:

Fs: 31.39 hz

Qms: 5.51

Vas: 2.356 cu. ft

Cms: 73.4 um/N

Mms: 352.2 g

Xmax: .625

Sd: 124 sq in

Qes: .43

Re: .765

Z: 1

Pe: 1000

Qts: .39

Dimensions:

OD: 15.25

ID: 14.25

Depth: 9.25

Magnet: 8" across

If someone could please set me up some specs for this box, I would greatly appreciate it. Also, if you could post or email me the winisd graph, I am interested in seeing what it is supposed to look like at the right tuning, as I really have no idea.

if i can find more information, please let me know.

as always, thanks again for all the help

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.