spacer spacer spacer spacer

dei 530t on 01 Chrysler sebing

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 25
Member spacespace
Joined: November 11, 2002
Location: United States
Posted: March 30, 2003 at 8:30 PM / IP Logged  
On my 01 chrylser sebing lx i have a factory alarm with keyless entry and i don't have a ground when arm output. it said i can hook up to my lock wire.. but when i start driving the door locks automaticly is that gonna effect the window roll up module? is there a way to hook it up so when the car is off it will work but as soon as i turn the car on it would cut off power to the roll up module so if i have the windows down and i start drivein and when the doors lock it wouldn't start rolling up the windows? thanks!
Silver - Posts: 325
Silver spacespace
Joined: October 01, 2002
Location: United States
Posted: March 30, 2003 at 9:14 PM / IP Logged  
First, your going to need to get a pulse timer to roll the windows up on lock - a one sec pulse won't do it. As for not having roll up when your car is running you can install a relay that disconnect the unit from the locks.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Monday, June 27, 2022 • Copyright © 1999-2022, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer