constant power lead for pioneer hd tuner

Home / the12volt's Install Bay / Car Audio / constant power lead for pioneer hd tuner (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

razer

Member - Posts: 2

Joined: September 25, 2009

Location: New Jersey, United States

Posted: September 25, 2009 at 11:18 AM / IP Logged

This is for a 08 Honda CR-V EX.

I installed an Avic z110 and I am adding the PIONEER GEX-P20HD - HD TUNER. I need to find a constant power lead in the driver's kick panel.

I may be a yellow wire.

Any ideas where I may find this wire?

Thanks,

r.

constant power lead for pioneer hd tuner -- posted image.

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 25, 2009 at 7:16 PM / IP Logged

The Yellow wire of the Z110 is a constant 12 volts. I have no idea where the wire is in the drivers kick panel. But it is in the radio harness and your radio is connected to it.

Back to Top

haemphyst

Platinum - Posts: 5,054

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: January 19, 2003

Location: Michigan, Bouvet Island

Posted: September 25, 2009 at 8:00 PM / IP Logged

A constant power lead is the same, anyplace in the car. If you've already connected the radio, tap the yellow wire behind it, and run it to the satellite module. Easy-peasy, lemon squeezy. Don't make it harder on yourself than you have to! :)

It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Back to Top

razer

Member - Posts: 2

Joined: September 25, 2009

Location: New Jersey, United States

Posted: September 25, 2009 at 11:23 PM / IP Logged

There is an inline fuse on the power lead of the HD tuner.

I wanted to keep it in the kick panel so I could easily get to it.

Back to Top

98neonr/t

Member - Posts: 31

Joined: January 27, 2008

Location: Tennessee, United States

Posted: September 30, 2009 at 9:50 AM / IP Logged

there should be a vehicle wireing color guide on this site just look up the alarm wire colors and tap it in the ignition harness that should be close enough to the dkp and if i remember that tuner box has like 6 foot of power wire on it

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

constant power lead for pioneer hd tuner

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.