will this relay work?

Home / the12volt's Install Bay / Relays / will this relay work? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

christopherrice

Member - Posts: 25

Joined: September 13, 2009

Location: North Dakota, United States

Posted: September 25, 2009 at 9:52 PM / IP Logged

Installing an auto start alarm in a 2006 Jeep Commander. Viper 5901 and iDataLink ADS-DLSL CH3. I need a relay for the Multiplex start/accessory/keysense control. I know the ones iDataLink sells are 12VDC 1A. Will this relay work instead..

DPDT

Power Consumption - 10.8 Watts

Nominal Coil Voltage - 12VDC

Nominal Coil Current - 75mA

Coil Resistance - 160 ohms +/- 10%

Pull-in Voltage - 9.6VDC

Drop-out Voltage - 1.2VDC min.

Contact Rating - 10A at 110AC or 24VDC

Maximum Operating Voltage - 250VAC/125VDC

Minimum Load - 100mA, 5VDC

Also it requires a diode on the GWR, is a N4001 alright or is there a different diode to be using?

Search for other posts by christopherrice

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: September 25, 2009 at 10:23 PM / IP Logged

That relay will work fine and a 1n4001 wil be fine also.

christopherrice

Member - Posts: 25

Joined: September 13, 2009

Location: North Dakota, United States

Posted: September 25, 2009 at 11:01 PM / IP Logged

Thank you, just the answer I was hoping for.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

will this relay work?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.