plexy

Home / the12volt's Install Bay / Car Audio / plexy (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dp85iroc

Member - Posts: 40

Joined: June 19, 2009

Location: New Hampshire, United States

Posted: September 28, 2009 at 10:28 AM / IP Logged

so if i wanted to put a plexy glass window on the back of an enclosure to show off the subs what size plexy can you use? like thickness and the length x width sizes

hmmm...thinking is always good...but question are better

Back to Top

d_rock_81

Member - Posts: 39

Joined: June 09, 2009

Location: North Dakota, United States

Posted: September 28, 2009 at 11:44 AM / IP Logged

Thick enough not to flex under the pressure of the subs if its going to be incorporated as part of the box.

Dustin Rockney

Rockstar Autosports

Back to Top

whiterob

Copper - Posts: 351

Joined: July 22, 2007

Location: United States

Posted: September 28, 2009 at 2:51 PM / IP Logged

I would use at least 3/4". You don't want to use too large of a piece or the plexiglass will flex. As long as the piece is not very large it would be fine with 3/4".

3/4" plexi is really expensive so you won't want to make the window too large anyways.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

plexy

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.