the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

eclipse ti 10


Post ReplyPost New Topic
< Prev Topic Next Topic >
97gss 
Copper - Posts: 235
Copper spacespace
Joined: February 12, 2004
Location: United States
Posted: October 07, 2009 at 12:31 PM / IP Logged  
Does anyone have the T/S parameters for one of these? Or, if you know what the recommended box size is, that would be great also.  Tried to PM Haemphyst since mine is the same as his,  but his inbox is full.
haemphyst 
Platinum - Posts: 5,054
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: October 07, 2009 at 1:32 PM / IP Logged  
My sealed enclosure ends up with just a bit north of .95 ft^3 net, and I stuffed that with about .5 to .6 pounds of Dacron pillow stuffing.
I'm sorry I can't help with a vented enclosure, and as far as T/S parameters, I'm only re-building a previous enclosure I had, (this is my second Ti 10") so I don't have them... I do remember that I ended up with a Q of right about .6 before, so you might go bigger with yours. I was looking for some extension, while maintaining excellent transient response.
Most people will think a Q of .6 will sound a bit thin, but this being an SQ woofer, I decided to use an enclosure to show that off.
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
97gss 
Copper - Posts: 235
Copper spacespace
Joined: February 12, 2004
Location: United States
Posted: October 07, 2009 at 3:59 PM / IP Logged  
Cool, thanks for the info!  I may do one just a hair over 1 cu. ft.  Do you have any idea what the displacement of this thing is or did your number include displacement?
haemphyst 
Platinum - Posts: 5,054
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: October 07, 2009 at 4:19 PM / IP Logged  
No idea what the displacement is. My numbers were net volume. It's smaller after the addition of the woofer. That's why I stuffed the enclosure. IIRC, it's about .19 or thereabouts.
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
97gss 
Copper - Posts: 235
Copper spacespace
Joined: February 12, 2004
Location: United States
Posted: October 07, 2009 at 5:07 PM / IP Logged  
Ok.  Thank you! 

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer