viper 5101 neutral safety problem

Home / the12volt's Install Bay / Car Security and Convenience / viper 5101 neutral safety problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rcoe

Member - Posts: 12

Joined: September 29, 2006

Location: United States

Posted: October 08, 2009 at 9:28 AM / IP Logged

First time doing one of these Vipers and running into a problem with the neutral safety switch.

I do have the blk/wht wire on the correct harness grounded and have checked with a meter.

Still everytime I trigger the remote start I get 8 clicks telling me neutral safety fault. Everything else is working great just cannot get it to even attempt to start. I can change it to the manual trans setting and then I get 7 clicks.

Any ideas?

Thanks.

rcoe

Member - Posts: 12

Joined: September 29, 2006

Location: United States

Posted: October 08, 2009 at 9:50 AM / IP Logged

Found the fix. Need to have the valet switch hooked up.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5101 neutral safety problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.