the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 chrysler neon/autostart as 2361tw fm


Post ReplyPost New Topic
< Prev Topic Next Topic >
Velocity Motors 
Moderator - Posts: 12,487
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 09, 2009 at 6:43 PM / IP Logged  

ADS-DLSL CH1 from iDatalink will work with the Autostart through the RS 232. It comes with the C1 chip for Sentry bypass and also does all the necessary functions for locks, unlock, door trigger, OEM alarm control , trunk release, tach and priority door unlocking.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
specs 
Copper - Posts: 120
Copper spacespace
Joined: October 02, 2009
Location: Saskatchewan, Canada
Posted: October 09, 2009 at 11:39 PM / IP Logged  

Thanks for all the input everyone....one more question, any of the above mentioned modules will have to be flashed with the correct software for my application....right? If I'm understanding the process correctly, I would need access to someone with the correct update cable for whatever brand of bypass I choose.

Thanks again, Al

specs 
Copper - Posts: 120
Copper spacespace
Joined: October 02, 2009
Location: Saskatchewan, Canada
Posted: October 12, 2009 at 7:23 PM / IP Logged  

Anyone?....will any of the above mentioned modules work right out of the box for my application, or do all of them need to be flashed for the particular vehicle installation?

Thanks, Al

Velocity Motors 
Moderator - Posts: 12,487
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 13, 2009 at 7:28 AM / IP Logged  
When you buy any of the mentioned bypasses, they will come programmed from the place you bought them from. You will still need to program them to the vehicle and also the chip.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
specs 
Copper - Posts: 120
Copper spacespace
Joined: October 02, 2009
Location: Saskatchewan, Canada
Posted: October 13, 2009 at 7:57 PM / IP Logged  

Understood Jeff, thanks much for the help....will post back and let all know how the install went!

Thanks, Al

specs 
Copper - Posts: 120
Copper spacespace
Joined: October 02, 2009
Location: Saskatchewan, Canada
Posted: December 01, 2009 at 12:33 PM / IP Logged  

Hello, finally got around to doing this install, with the above-mentioned R/S and an ADS bypass....everything went well except for the RS-232 hookup, couldnt get that to work for the life of me! In the end, I went w2w on all connections and it has been working great. Small issue with the remote itself that I need some help with....twice in the last 24 hours the remote seems to have "locked up", won't respond to any buttons being pressed and the little LED in upper left corner stays lit. Solution seems to be to remove the battery and reinstall...then all is fine. Anyone run across this in the past.....battery going dead or some kind of trouble alert?

Thanks, Al

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, June 28, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer