ign2 wire which color?

Home / the12volt's Install Bay / Car Security and Convenience / ign2 wire which color? (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

sublime44

Member - Posts: 25

Joined: October 09, 2009

Location: Ontario, Canada

Posted: October 09, 2009 at 7:58 PM / IP Logged

This link here http://64.85.6.118/diagrams/diagrams.asp states that my 2000 gmc sonoma has an ign 2 wire which is white but the link on this site states that it should be orange. Which should I follow?

sublime44

Member - Posts: 25

Joined: October 09, 2009

Location: Ontario, Canada

Posted: October 09, 2009 at 8:00 PM / IP Logged

Sorry here's a direct link

http://64.85.6.118/diagrams/diagrams.asp

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: October 09, 2009 at 9:33 PM / IP Logged

Me again here, you should follow your meter and its's readings!

commit your way to jehovah and he will act in your behalf. psalms 37:5

i am an idiot

Platinum - Posts: 13,674

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: October 09, 2009 at 9:35 PM / IP Logged

What is a meter? What are these readings you keep talking about?

http://64.85.6.121/diagrams/diagram.asp?ModelID=15370&MakeID=20&link=BULLDOG

Did you read note 4?

According to techservices.audiovox.com there are 3 Ignition wires.

Battery	RED	(+)	IGNITION SWITCH HARNESS
Ignition 1	PINK	(+)	IGNITION SWITCH HARNESS
Ignition 2	ORANGE	(+)	IGNITION SWITCH HARNESS
Ignition 3	WHITE	(+)	OR PNK/WHT IGN HARNESS (TRANSMISSION)
Accessory 1	BROWN	(+)	IGNITION SWITCH HARNESS
Starter 1	YELLOW	(+)	OR VIO IGN SWITCH HARNESS
Anti-Theft Type	RESISTOR BASED SYS
Anti-Theft Descript	PASSLOCK II
Key Sense	LIGHT GREEN	(-)	STEERING COLUMN HARNESS
Neutral Safety	NOT GRDING
Tachometer	WHITE	(-)	COIL TOP OF ENG PASS SIDE
Speed Sense	GREEN / WHITE	(AC)	PASS FRT QTR BLK 80 PIN CONN POS 16
Parking Lights	BROWN	(+)	AT LIGHT SWITCH OR LTBLU PLUG AT BCM
Brake Lights	LIGHT BLUE	(+)	BRAKE SWITCH ABOVE BRAKE PEDAL OR WHT
Reverse Lights	LIGHT GREEN	(+)	NEUTRAL SAFTEY SWITCH
Horn	BLACK	(-)	BRN PLUG AT BCM

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: October 09, 2009 at 9:54 PM / IP Logged

i am an idiot wrote:

What is a meter? What are these readings you keep talking about?

It's a superbly crafted tool, that can actually read voltage, i'm so glad to have found it, you really should get one mr.idiot! LOL ign2 wire which color? -- posted image.

commit your way to jehovah and he will act in your behalf. psalms 37:5

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: October 09, 2009 at 9:56 PM / IP Logged

It also give you the ability to connect wires without a doubt in you mind!

commit your way to jehovah and he will act in your behalf. psalms 37:5

sublime44

Member - Posts: 25

Joined: October 09, 2009

Location: Ontario, Canada

Posted: October 09, 2009 at 9:57 PM / IP Logged

So which diagram do iI follow in regards to ing 1 and 2? or 3??

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: October 09, 2009 at 10:00 PM / IP Logged

Connect all ignitoin wires at the harness, but that white one must be used as an ignition 2 to enable remote starting!

commit your way to jehovah and he will act in your behalf. psalms 37:5

sublime44

Member - Posts: 25

Joined: October 09, 2009

Location: Ontario, Canada

Posted: October 10, 2009 at 9:01 AM / IP Logged

t&t tech wrote:

Connect all ignitoin wires at the harness, but that white one must be used as an ignition 2 to enable remote starting!

Would you know what readings I should be getting on the white wire?

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 14, 2004

Location: Isle Of Man

Posted: October 10, 2009 at 10:38 AM / IP Logged

sublime44 wrote:

t&t tech wrote:

Connect all ignitoin wires at the harness, but that white one must be used as an ignition 2 to enable remote starting!

Would you know what readings I should be getting on the white wire?

Ignition (+) Input

Connect to a source that has (+)12 V DC only when the ignition key is in the run and start positions. See your installation manual for more info.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.