pats problem

Do you know where the key ring is?Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

you meen the transceiver antena ring.What do i do exactly?Stage 3 body kit,side exhaust,Roush lowering springs,k&n filter,ported & polished throtel body.and gonna add a cobra supercharger.

Yes, there's a plug with four wires coming out, at pin 2....you have an ignition wire, test it out....if you don't have voltage when you turn the key without interruption while cranking, it might be your problem. Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

Just tested the pin 2 wire and there is constant power the other 3 seamed to have no power at all,so i asume these are data and ground wires. Does anyone here knows how to dissarm the pats system?temporaly just so i can go shopping at least.? Stage 3 body kit,side exhaust,Roush lowering springs,k&n filter,ported & polished throtel body.and gonna add a cobra supercharger.

syl20rochon~ i really do apreciate in taking some time to help me. Thanks!! Yes,i have disconected the battery for up to 24hrs and still nothing.. The ford dealership here isn't any help,even though ive been a customer for over 5 years.They tell me that i need $130 per key to reprogram and they need both.so thats $260 just for the keys..its rediculous..ive also called some local locksmiths but they don't have the programing tool..Stage 3 body kit,side exhaust,Roush lowering springs,k&n filter,ported & polished throtel body.and gonna add a cobra supercharger.

Let me see tomorrow if I can find a way of re-programming your key without the need of the tech tool.....I know the master tech at our ford dealer personally.Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

at the tranceiver ring    pin 1 is ground            pin 2 is 12v in     in        run or start            pin 3 is data            pin 4 is data all of your keys dont work ?If i Can't Install it    I Don't need it   Joe

no,both keys seam to be useless..Stage 3 body kit,side exhaust,Roush lowering springs,k&n filter,ported & polished throtel body.and gonna add a cobra supercharger.

Hey, I'm very sorry to tell you that I've called my friend at our Ford dealer, he's a master tech there....there is no way around the need to use there tech tool to reprogram your keys....it cannot be bypassed at all....Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.