passlock 2 bypass confusion

Home / the12volt's Install Bay / Car Security and Convenience / passlock 2 bypass confusion (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

syl20rochon

Copper - Posts: 298

Joined: October 16, 2009

Location: Ontario, Canada

Posted: October 20, 2009 at 8:56 PM / IP Logged

If you really feel that the over cranking is really too much, you can plug the tach wire and make you remote starter learn it...you will solve the problem. Just remember that when it's very cold, that extra kick can be very helpful for proper starting but in the other hand, in the cold weathers, if your truck overcranks, you should get that tach wire hooked up. It was my pleasure working with you....

Cheers.

Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.

sublime44

Member - Posts: 25

Joined: October 09, 2009

Location: Ontario, Canada

Posted: October 20, 2009 at 10:28 PM / IP Logged

Thanks again for the help. I screwed up though... I re installed all the paneling, mount the unit nicely, and after doing so I realized that I didnt test the heater.... sure enough it doesnt turn on whn i remote start the truck, and yes I have the heaters turned on if you're wondering :) I must have taped into the wrong accessory wire even though the meter readings were correct. Oh well live and learn

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

passlock 2 bypass confusion

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.