fortin can sl2 / 2007 nissan maxima

Home / the12volt's Install Bay / Car Security and Convenience / fortin can sl2 / 2007 nissan maxima (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

dcman41

Copper - Posts: 211

This member has made a donation to the12volt.com. Click here for more info.

Joined: October 21, 2005

Location: United States

Posted: October 22, 2009 at 12:47 PM / IP Logged

Hi, i am about to install a fortin can-sl2 into a 2007 nissan maxima with intelli key. But i have a quick question. In the diagram for the intelli key wiring which i posted in this topic, it says make 3 to 4 loops around the ingition barrel. Which wires go around the ignition barrel? Any input on this situation is appreciated thank you.

http://www.zshare.net/download/67344610735fece9/

theres the pdf file for the intelli key wiring so you can see what im talking about.

fortin can sl2 / 2007 nissan maxima -- posted image.

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: October 22, 2009 at 10:49 PM / IP Logged

according to the instructions its BROWN / white and light blue/black

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: October 22, 2009 at 11:44 PM / IP Logged

I've done a bunch of those cars and I've never wrapped loops of wire around anything.

Never heard of that site either.

It's possible you're looking at a page of the CAN-SL2's install guide that's supposed to be for a different kind of car. That module covers many different kinds of cars and each has its own type of installation.

Go directly to www.ifar.ca and you can either search by the name of the product, or just click on Vehicles (easier) and put in your car.....when you find the CAN-SL2 there should be a place to click for the install guide.

Each car has an "install type." Be sure that you're looking at the correct type for your car.

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 23, 2009 at 8:06 AM / IP Logged

Chris is right, the Nissan uses CANBUS to do immobilizer bypass not the ring wraps. You are looking at the Dodge/Chrysler/Jeep installation diagram.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

dcman41

Copper - Posts: 211

Joined: October 21, 2005

Location: United States

Posted: October 23, 2009 at 11:51 AM / IP Logged

Ok, i figured it out, that diagram i posted is completely OPTIONAL to have the ignition barrel unlocked after the remote start

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: October 23, 2009 at 2:35 PM / IP Logged

no he is right you need a ring for smart key in order to do a take over

dcman41

Copper - Posts: 211

Joined: October 21, 2005

Location: United States

Posted: October 23, 2009 at 11:16 PM / IP Logged

Ok, so i will do it so i can do the take over, but that still leaves me with what wires get wrapped around the ignition barrel ?

dcman41

Copper - Posts: 211

Joined: October 21, 2005

Location: United States

Posted: October 24, 2009 at 3:18 PM / IP Logged

Also one last question, in that diagram, it looks as if i have to connect to both key sense wires RED / blue + RED / white and diode isolate. My question is which wire off the alarm/remote start would i connect those to ? I looked through the whole manual and none of them are a key sense wire. It shows the keysense wires going to the ignition? What do i do here ? Everything else is pretty much straight forward.

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 24, 2009 at 9:18 PM / IP Logged

dcman41 wrote:

Ok, so i will do it so i can do the take over, but that still leaves me with what wires get wrapped around the ignition barrel ?

The LIGHT BLUE/BLACK will need to be extended and wrapped aound the ignition column. Attach the end of the LIGHT BLUE/BLACK extended wire to the BROWN / WHITE wire on the 4 pin WHITE connector on the CANSL2

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 24, 2009 at 9:20 PM / IP Logged

dcman41 wrote:

Wire it to ignition.... it says it right on the diagram. fortin can sl2 / 2007 nissan maxima -- posted image.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.