spacer spacer spacer spacer

excalibur al2000 e ground while armed

Post ReplyPost New Topic
< Prev Topic Next Topic >
Copper - Posts: 210
Copper spacespace
Joined: June 13, 2002
Location: United States
Posted: October 22, 2009 at 10:08 PM / IP Logged  
Any installers here have experience with an Omega/Excalibur AL2000-E brain that keeps orange ground while armed wire active during remote start and not releasing it after inserting key ?
Issue is as follows.. I wired a starter disable on a 2003 Tundra V6/2wd with the orange wire. After remote start, and inserting key/stepping on brake pedal, the wire won't let go to allow relay to rest and let starter wire close circuit. I was chasing a P0705 transmission Park/Neutral switch error and found out that the start circuit on toyotas double as a voltage sense wire as well and this wire cannot be cut when vehicle is put in drive/reverse. A cut wire fails voltage sense and triggers the ECU code. I also noticed if I turn off the engine after remote start, I cannot restart the vehicle until I hit the disarm button on omega remote (which allows relay to discharge bridging starter circuit to crank)
Is there a way to program the brain to permanently disable the orange wire once disarmed during RS ? is there a setting I'm missing ? All functions work on this alarm except for this little snafu..
Any help/tips appreciated..
Silver - Posts: 564
Silver spaceThis member consistently provides reliable informationspace
Joined: May 24, 2006
Location: New Jersey, United States
Posted: November 09, 2009 at 9:49 AM / IP Logged  
The AL-2000-e cannot be programmed to disable the orange wire while the RS is running. There is an option to turn it off completely. It is option feature #4. The programming steps are as follows:
1. Turn ignition on
2. Turn ignition off
3. Within 5 seconds, press & release valet switch 5 times
4. Within 10 seconds, press & release valet switch 4 time for feature #4
5. Within 10 seconds, press & release the unlock button on the remote, siren will chirp twice to confirm programming
6. Turn ignition on than off to end program mode or wait 10 seconds

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Wednesday, October 4, 2023 • Copyright © 1999-2023, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer