2008 toyota tundra

Home / the12volt's Install Bay / Car Security and Convenience / 2008 toyota tundra (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

emerson098

Member - Posts: 14

Joined: September 15, 2009

Location: Alberta, Canada

Posted: October 22, 2009 at 9:43 PM / IP Logged

Installed my first Viper today (5901), excluding me forgetting to ground the neutral safety all went well . The issue I am having is I couldn't get the door locks to work. I found a blue wire and a white wire (in a blue harness) coming from the door that when I probed my multimeter into a 12v source would drop to 1-2 volts when locking/unlocking. I connected the blue(?) and green wires from the starter to these wires but could not get it to work. What did I do wrong?

Thanks in advance.

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: October 22, 2009 at 10:01 PM / IP Logged

Power Unlock RED (-) IN HARNESS IN DRIVERS KICKPANEL

PowerLock WHITE (-) IN HARNESS IN DRIVERS KICKPANEL

Are these the wires you have connected?

emerson098

Member - Posts: 14

Joined: September 15, 2009

Location: Alberta, Canada

Posted: October 22, 2009 at 10:15 PM / IP Logged

I have gotten like 3 different wire colors for lock/unlock the wires I found were Blue and White.

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: October 22, 2009 at 10:19 PM / IP Logged

white and red are the correct wires, test while turning key in cyclinder of the door

emerson098

Member - Posts: 14

Joined: September 15, 2009

Location: Alberta, Canada

Posted: October 22, 2009 at 10:23 PM / IP Logged

Looks like staub wronged me on this one I will give those wires a try. I should be able to hook the Blue/White up directly correct?

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: October 22, 2009 at 10:46 PM / IP Logged

the wire are white and red, not blue/white 2008 toyota tundra -- posted image.

emerson098

Member - Posts: 14

Joined: September 15, 2009

Location: Alberta, Canada

Posted: October 22, 2009 at 10:48 PM / IP Logged

metz35 wrote:

the wire are white and red, not blue/white 2008 toyota tundra -- posted image.

Staub told me Blue white I swear! 2008 toyota tundra -- posted image.

emerson098

Member - Posts: 14

Joined: September 15, 2009

Location: Alberta, Canada

Posted: October 22, 2009 at 10:51 PM / IP Logged

Actually turns out staub was telling me that the car arms/disarms with lock wires and gave me Pink/Lt.Blue (Arm/Disarm) they obviously tested like locks but were arm/disarm wires only! 2008 toyota tundra -- posted image.

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: October 22, 2009 at 10:51 PM / IP Logged

checked 3 sources and was 3 for 3

Power Unlock RED (-)

HARNESS IN DRIVERS KICKPANEL

PowerLock WHITE (-)

HARNESS IN DRIVERS KICKPANEL

metz35

Copper - Posts: 458

Joined: January 13, 2003

Location: Pennsylvania, United States

Posted: October 22, 2009 at 10:54 PM / IP Logged

yes those are the correct arm and disarm wires 2008 toyota tundra -- posted image.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.