s10 remote starter wiring diagram

i have a Chevy s10 4 cylinder automatic i don't know if it has a security system but in the instrument cluster i see a security light up in the left hand upper side. i need to locate a wiring diagram so i can install a commando ez-2500 remote starter in this truck. unless someone here says this remote starter will not work. if so what would you recommend. thanks

opp's i forgot to tell the year. it is a 2000 chevy s10 4 cylinder with automatic. power windows,mirros,cruise, if that maks any difference.

DEI 1100 will do, see the vehicle wiring charts here.

FUNCTION DATACOLOR LOCATION POLARITY PICTURE

+12 Volts: Red Ignition Harness +   Ignition: Pink Ignition Harness +   Ignition 2: Pink/White or White** Ignition Harness +   Accessory: Orange Ignition Harness +   Accessory 2: N/A   Starter: Yellow Ignition Harness +     Tachometer: White or WHITE/ Black Coil AC      Parking Lights: Light Blue At switch +   Brakeswire: White at switch Lock :Light Blue driver's kick panel or keyless entry module +   Unlock :White driver's kick panel or keyless entry module +     Arm :Tan*** Driver's Door Switch -   Disarm: Light Green In driver's door boot -   Doorpin: White Courtesy light -    

Security: OEM ALARM,PASSLOCK II

Comments: * VEHICLE IS EQUIPPED WITH PASSLOCK II ANTI-THEFT SYSTEM. ** 2ND IGNITION MUST BE CONNECTED FOR REMOTE START OR CHECK ENGINE LIGHT WILL TURN ON AND DRIVEABILITY PROBLEMS WILL BE EXPERIENCED, POSSIBLY RESULTING IN SERIOUS TRANSMISSSION DAMAGE. *** PULSE AT SAME TIME AS LOCK..Sylvain Rochon

MECP security specialist

Tech support for remote starters

26 Years of experience counts

I'm here to help.