07 maxima intellikey not remote starting

Sounds like you've got some of your ignition/accessory/start wires mixed up. Even if you didn't get the transponder bypass right, the starter should still crank, even though the engine won't start. Do this: Unplug CAN-SL2 and set aside. Withdray regular key from inside Maxima's Intelligent Key, insert into car's ignition. Don't turn key on.....just insert it there, in the Off position, and leave it like that. Try remote start, does it work? If it works, OK, you do have a problem with your CAN-SL2. If the remote start still doesn't work, go back and recheck and retest your ignition and accessory wires.

I figured it out, the maxima has two ignition wires even though, they were not listed in the wiring sheet. I added a relay and powered the second ignition and it works perfect!