command start cs310i programing

Home / the12volt's Install Bay / Car Security and Convenience / command start cs310i programing (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

lnagy

Member - Posts: 3

Joined: November 19, 2008

Location: Saskatchewan, Canada

Posted: November 10, 2009 at 8:05 AM / IP Logged

I have command start remote starter cs310i and I am in need of the programming manual

I purchased a used 2002 Buick rendezvous with this starter in it.

I need the programming instructions for this starter to reprogram the tach input

Your site is great because I found the wiring for this starter on your site

Thanks

Back to Top

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: November 10, 2009 at 8:33 AM / IP Logged

it should be that you flash the hood pin then push and hold the brake and press the lock and unlock buttons on the remote. parking lights should flash 5 times. Then start the vehicle with the key allow it to get to regular idle at which point you will push and hold the brake pedal and the parking lights should flash 5 times to confirm tach programming has been completed

Back to Top

lnagy

Member - Posts: 3

Joined: November 19, 2008

Location: Saskatchewan, Canada

Posted: November 10, 2009 at 9:16 AM / IP Logged

Thanks chadwa2003 for the info

I will give that a try tonight when I get home

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 10, 2009 at 11:17 PM / IP Logged

The CS310i requires it be done manually through the options programming. It's a PITA but here is the programming sheet.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

lnagy

Member - Posts: 3

Joined: November 19, 2008

Location: Saskatchewan, Canada

Posted: November 11, 2009 at 11:40 AM / IP Logged

I am still having problems - I can now get into the programing - the parklights flash as they should. My main problem is the buick will start - run for 4 secs and stop.I have the programming for 270i and the 290i and they are different. My remote is a 4 button and i used lock as 1, unlock as 2, and start as button 3. my command start is a cs-310i and i have never seen the programming sheet for this model. It is my understanding from reading the forums that the cs300i and the cs310i are the same.I put the 270i default program in and then the buick would not start but the locks still worked.I then put the 290i program in and we are back to my starting problem of the buick starting -running for 4 secs-and stopping.

Your help is appeciated

My email is l.nagy@sasktel.net if anyone has a programming manual

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

command start cs310i programing

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.