the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 bonneville gxp w/autostart 2600


Post ReplyPost New Topic
< Prev Topic Next Topic >
mtshowdown 
Member - Posts: 2
Member spacespace
Joined: November 14, 2009
Posted: November 14, 2009 at 4:08 PM / IP Logged  
Installing an autostart 2600 remote starter with an Idata ADS-DLSL GM. The driver door unlocks with 1st command will not unlock remaining doors with second command. Hard wired the 2600 to the idata module, did not connect the door/trunk status output from the idata module (not sure where to connect this), did connect the door lock, unlock input and the trunk input. The doors unlock correctly with the factory fob. Any help would be appreciated. Thank you.
mtshowdown 
Member - Posts: 2
Member spacespace
Joined: November 14, 2009
Posted: November 14, 2009 at 5:41 PM / IP Logged  

Additional information. When I tap into the unlock wire between the idata and starter control ( green wire on the autostart 2600 12 pin and blue/black wire on the idata 10 pin), touch it to ground twice all doors unlock as they should. This tells me that the problem is with the autostart 2600 controller not sending the second pulse or I need to connect the idata green door/trunk status output somewhere (possible needed to let the autostart know the 1st pulse was executed).  Any ideas? Thank you.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 17, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer