530t conntected to trunk release output?

I have a Viper 5901 in my 2000 Ford Expedition and I would like to add a 530t window module to my front 2 windows.

Should I hook the RED / White (-) Auxiliary Input wire on the 530t to the H1/1 RED / White Trunk Release Output wire on the 5901? or should it be hooked up to the H2/3 WHITE/ Violet Aux 1 Output wire?

I would like to be able to press and hold down the Aux button to vent and then completely roll down the windows. If I connect the RED / White Aux input wire to the H2/3 Aux 1 Output wire, will I have to press the function button then the aux button to activate the windows?

Yes but any other aux output is normally used also to get full 530t functioning, RED / white takes about 3 secs. before it responds, also use the orange GWA output and run to both window  motors, then you have 1 touch from both front doors.

Ok I think I will connect it to the H2/3 WHITE/ Violet Aux 1 Output wire. I will also use the Orange GWA wire.

Thank you for your help.