viper 5701 on 08 toyota tacoma

Home / the12volt's Install Bay / Car Security and Convenience / viper 5701 on 08 toyota tacoma (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

moserjj

Member - Posts: 6

Joined: December 18, 2003

Location: United States

Posted: November 24, 2009 at 9:22 AM / IP Logged

How would you wire up the relay for that? I'll probably try the easy way first and if not successful, try the relay method instead

Back to Top

yimke

Copper - Posts: 417

Joined: June 23, 2009

Location: Nebraska, United States

Posted: November 24, 2009 at 9:24 AM / IP Logged

That or you could use factory alarm rearm wire instead of lock output if it is negative trigger for locks. This will cause the vehicle to lock after remote start is deactivated. Causing the BCM to shutdown output to headlights after 30 seconds.

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: November 24, 2009 at 4:51 PM / IP Logged

Look here...

https://www.the12volt.com/installbay/forum_posts.asp?tid=90427&KW=toyota+autolamps

the diagram shows how to do it correctly. Remove the column shroud and locate the lightswitch plug. Test for a wire that goes to ground when you turn the autolamp feature on. This is the wire you need to cut...

Mike M2

Tech Manager

CS Dealer Services

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5701 on 08 toyota tacoma

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.