the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

05 murano


Post ReplyPost New Topic
< Prev Topic Next Topic >
habco1 
Copper - Posts: 56
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 17, 2004
Location: Saskatchewan, Canada
Posted: November 22, 2009 at 9:43 PM / IP Logged  
I am installing a Prostart 3471 into a 2005 Nissan Murano using an ADS-AL-CA. The problem is that when I remote start the vehicle it just cranks but does not start. The Bypass programs correctly as the guide says but the only time the vehicle will start with the remote starter is when I insert a key in the ignition. Can you help me out please? All the websites I use for wiring diagrams except Audiovox do not have any mention for Keysense and AudioVox says it is BLACK/ Red in the Ignition Harness. I tried hooking up this wire and it made no difference. Is this wire necessary?
If you always do,what you always did,you will always get, what you have always got
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: November 23, 2009 at 10:23 AM / IP Logged  
Keysense shouldn't be necessary.
Since the remote start works with a key in the ignition, your ignition, accessory, and starter connections should all be good and correct.
The fact that the module programs successfully would make me think that your data wires, constant, ground, and ignition must all be correct---you wouldn't be able to program it otherwise.
How about the ground-when-running from your remote starter? I'd look there.
Not familiar with ProStart, or what name they would use for ground-when-running. You might see names like "status," "ignition 3," and so forth.
Anyway, the blue/white wire from the ADS module needs to see a ground BEFORE AND DURING remote start.
That is, as soon as you activate the remote starter, and BEFORE it even turns the ignition on, that blue/white should already be seeing a ground, and that ground should stay present and not go away until after the remote starter has been turned off.
If you're using an output from the ProStart called "factory alarm disarm" that wouldn't work, because it only makes a one-second pulse at the beginning of remote start.
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: November 23, 2009 at 3:47 PM / IP Logged  
I'm wondering, are you hard wiring the units together or using data? I would suggest hardwire, had many issues like this with data...
Mike M2
Tech Manager
CS Dealer Services
habco1 
Copper - Posts: 56
Copper spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 17, 2004
Location: Saskatchewan, Canada
Posted: November 23, 2009 at 7:57 PM / IP Logged  
I did use Data to hook it up. I figured out the problem though. I had put the starter into secure lock. When I disabled secure lock it started right up. I did not know that the bypass did this on its own. It was acting like there was to different keys being used and cancelling each other out. Thanks for the help guys.
If you always do,what you always did,you will always get, what you have always got

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer