the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

what sub to go with?


Post ReplyPost New Topic
< Prev Topic Next Topic >
james.jaros 
Member - Posts: 38
Member spacespace
Joined: October 21, 2009
Location: Wisconsin, United States
Posted: December 30, 2009 at 11:23 AM / IP Logged  
I had the box built and it sounds good but... My brother has a xxx 12 and it is way better. He is using a us amp that I believe is 1000 rms at 1 ohm. He also had his box built 1/2 cuft larger than spec. Is this a good idea should I do it with the MX? I am also thinking of upgrading from my Fosgate 1000. Any suggestions? I would like to stay around $350 or less as far as Ebay prices go. Thanks!
-under_lucky-
j.reed 
Copper - Posts: 716
Copper spacespace
Joined: January 05, 2009
Location: Arkansas, United States
Posted: December 30, 2009 at 5:47 PM / IP Logged  
The XXX is about twice the sub of an MX, with twice the price tag too. There is a reason it sounds better, it is better. More power would help some for sure, but it will not gain you much output to the ear. It may gain you a hear able difference at lower freqs though and that may be what your wanting. Another huge difference between the 2 could simply be the vehicle they are in.
what sub to go with? - Page 4 - Last Post -- posted image.
james.jaros 
Member - Posts: 38
Member spacespace
Joined: October 21, 2009
Location: Wisconsin, United States
Posted: December 30, 2009 at 5:52 PM / IP Logged  
Any suggestions on a better amp for this sub?
-under_lucky-
j.reed 
Copper - Posts: 716
Copper spacespace
Joined: January 05, 2009
Location: Arkansas, United States
Posted: December 30, 2009 at 6:02 PM / IP Logged  
Did you go with the dual 1ohm or 2ohm MX?
what sub to go with? - Page 4 - Last Post -- posted image.
james.jaros 
Member - Posts: 38
Member spacespace
Joined: October 21, 2009
Location: Wisconsin, United States
Posted: December 30, 2009 at 6:19 PM / IP Logged  
Dual 2ohm
-under_lucky-
j.reed 
Copper - Posts: 716
Copper spacespace
Joined: January 05, 2009
Location: Arkansas, United States
Posted: December 30, 2009 at 6:32 PM / IP Logged  
I was cruising the bay earlier and saw a used US Amps Xterminator 400x that would get the job done. Really anything of good quality and put out your 1500rms at 1 or 4ohms. As I said before though, it will not really gain you much or any hear able difference. You may pick up some in the lower freq range and on a mic it would make a difference. In the vehicle you may gain 3db or so.
what sub to go with? - Page 4 - Last Post -- posted image.
james.jaros 
Member - Posts: 38
Member spacespace
Joined: October 21, 2009
Location: Wisconsin, United States
Posted: January 12, 2010 at 12:07 PM / IP Logged  
Ok, you are right the xxx is much better. So, I sold my mx to a friend who gave me a great price with the box almost what I had into it. I also sold my amp. I recently heard a w7 12 that sounded amazing compared to my mx. The guy had it in a Taurus I have an 08 Sebring. He only had the amp and sub nothing done to the inside of the car... I have found a 12w7 for 375. Is there any I can ask a huge favor? Could you draw up one more box for me for the w7 with the same limitaions on dimensions? I really appreciate the help. I was also wondering what amp to go with the w7. I was thinking about the JL 500/1
-under_lucky-
j.reed 
Copper - Posts: 716
Copper spacespace
Joined: January 05, 2009
Location: Arkansas, United States
Posted: January 12, 2010 at 4:05 PM / IP Logged  
Yeah i can do it tonight. The enclosure should be .25 smaller than what you had. I would look at the JL1000/1 if you got the money. That way you can get everything you would ever need out of the sub.
what sub to go with? - Page 4 - Last Post -- posted image.
j.reed 
Copper - Posts: 716
Copper spacespace
Joined: January 05, 2009
Location: Arkansas, United States
Posted: January 19, 2010 at 7:06 PM / IP Logged  
JL 12w7 slot ported 1.75 cu.ft. NET FB=32Hz
You will want to mount it to the outside of the double baffle for it to have sufficient mounting depth. Sorry it took me a while to get it done for you. Been pretty busy lately.
what sub to go with? - Page 4 - Last Post -- posted image.
Page of 4

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer