2005 explorer tach wire

Home / the12volt's Install Bay / Car Security and Convenience / 2005 explorer tach wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jferrarini

Member - Posts: 3

Joined: November 25, 2009

Location: Nebraska, United States

Posted: November 26, 2009 at 3:14 PM / IP Logged

What is the best wire to use for the tach signal? everything I've tried has been 12-14v not the 1-6 like viper wants.

calitech247

Copper - Posts: 68

Joined: November 02, 2009

Location: California, United States

Posted: November 26, 2009 at 3:31 PM / IP Logged

Hows it goin... Try using the light blue wire (not the white wire) at any ignition coil or coil pack. If your explorer is a sport TRAC then use the tan / YELLOW wire at the PCM located on the passenger side firewall under the hood.

chev104275

Gold - Posts: 1,428

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: November 26, 2009 at 3:58 PM / IP Logged

you can use any uncommon wire at the fuel injectors also

If i Can't Install it I Don't need it Joe

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 explorer tach wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.