alarm srs light on

hey guys i recently got my friend to install my viper 5701 w/ remote start and a PKALL bypass module on my 2009 toyota tacoma. When i remote start the car the air bag deploy light turns on, but when i start it normally with the key it doesn't turn on. i was wondering what seems to be wrong??? thank you

more then likely he is missing one of these wires      Ignition 1          BLACK/ RED          (+)          IGNITION SWITCH HARNESS                Ignition 2          BLUE / YELLOW          (+)          IGNITION SWITCH HARNESS                Accessory 1          WHITE/ GREEN          (+)          IGNITION SWITCH HARNESS                Starter 1          GREEN/ BLACK          (+)          IGNITION SWITCH HARNESS                Starter 2          BLACK/ WHITE          (+)          IGNITION SWITCH HARNESS

Either missing one of those wires listed above, or possibly he has one of the ignition wires powered up as accessory instead of ignition. Turn the heater on High, start car with key...you'll observe that the blower motor stays on during cranking, unlike most other cars. That's just how Toyota does things. Anyway, now turn it off, and start it by remote....does the blower still stay on during cranking, or does it turn off and then come back on?

when i remote start the car the blower does not even turn on at all.

^ hope you didn't pay him. He didn't do it the right way then. And that's likely the reason your airbag light is on.A DMM is a beautiful thing.

MECP Advanced Installer Certified.