the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

05 grand prix, remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
beegbie 
Copper - Posts: 341
Copper spacespace
Joined: August 17, 2002
Location: United States
Posted: January 05, 2010 at 10:02 PM / IP Logged  
Velocity Motors wrote:
Set system to double pulse.
Double pulse won't work on this wire(no matter how many times the key is turned to unlock in the driver's door cylinder it will only unlock the driver's door). If the remote start had a second door unlock you could send this to the unlock wire but the 501 doesn't have this. You will have to send your unlock wire (Blue)to the ORANGE / black in the car. Then use the factory alarm disarm wire to the purple wire in the car. The other issue this will cause is the door will unlock before start so the pulse after start will have to be wired to the RED / black lock wire in the car. Hope this helps.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 9, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer