spacer spacer spacer spacer

wiring, punch 400-4

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 2
Member spacespace
Joined: December 01, 2009
Location: West Virginia, United States
Posted: January 03, 2010 at 1:12 PM / IP Logged  
i have a punch 400-4. i have a set of jl c5650 rated 75 watts rms
the punch is rated 4x50 at 4 ohms 100x4 at 2 ohms the pvc that came with it says the amp is rated 4x74 4 ohm an 124 x4 at 2 ohm this is at 14.4 volts im not getting 14.4 volts all the time to this amp even with a capacitor. the capacitor usually shows 13.8 or 14.1 it usually 13.8.
my question is there any way to wire up my jl speakers to get a 2 ohm load from the front channels of this amp
i am an idiot 
Platinum - Posts: 13,598
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: January 03, 2010 at 1:54 PM / IP Logged  

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Sunday, December 4, 2022 • Copyright © 1999-2022, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer