the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1999 golf tdi remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
jgtech 
Member - Posts: 4
Member spacespace
Joined: January 03, 2010
Location: Ohio, United States
Posted: January 04, 2010 at 3:16 PM / IP Logged  

Does anyone know what wire I would connect a remote start glow plug sensor wire to on a 1999 VW Golf TDI (Diesel)? Can't find much in wire diagrams for the TDI.

Jon
jgtech 
Member - Posts: 4
Member spacespace
Joined: January 03, 2010
Location: Ohio, United States
Posted: January 04, 2010 at 3:19 PM / IP Logged  

1999 New VW Golf TDI

Mars11 Remote Start installation

Jon
91stt 
Silver - Posts: 564
Silver spaceThis member consistently provides reliable informationspace
Joined: May 24, 2006
Location: New Jersey, United States
Posted: January 04, 2010 at 4:15 PM / IP Logged  
Glow Plug: VIOLET/WHITE-At Glow Plug Relay At Relay Panel Under Left Side Of Dash
jgtech 
Member - Posts: 4
Member spacespace
Joined: January 03, 2010
Location: Ohio, United States
Posted: January 06, 2010 at 12:19 PM / IP Logged  
Thanks, I hope to tackle this, this weekend. I am also getting mixed info on the tach wire colors. Do you also know what I'd look for here? Any other wiring remote start wiring suggestions would be helpful. I have printed off the two wiring reference sheets I found on this site, but they seem to conflict in some areas.
Jon
jgtech 
Member - Posts: 4
Member spacespace
Joined: January 03, 2010
Location: Ohio, United States
Posted: January 27, 2010 at 6:13 PM / IP Logged  

I got the remote start to work, however intermittently it will set off the alarm (horn) if locked when starting. I tried attaching the - pulse wire from the remote start with a relay connecting the two ends of the alarm wire under the dash, in the Comfort Control module. This didn't help. If I connect to the unlock wire in the drivers door, I don't know how I would lock it after the car is started? I wouldn't want it unlocked during the run time? Any Ideas?

Jon
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: January 27, 2010 at 7:26 PM / IP Logged  

make sure you have the factory alarm disarm wire hooked up. if you dont, set the unit to UNLOCK-START-RELOCK.

Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, July 18, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer