add on senors not setting off alarm.

Home / the12volt's Install Bay / Car Security and Convenience / add on senors not setting off alarm. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

kgreene

Member - Posts: 2

Joined: January 04, 2010

Location: Georgia, United States

Posted: January 04, 2010 at 5:11 PM / IP Logged

I have a hornet 740T alarm system that i have just installed in my 94 ford ranger. everything seems to work properly on it so i added in a Directed 506T audio sensor wired it up according to what the manual told me even with the correct diode that it states in the manual and it will not set off the alarm the audio unit itself picks up when shacking keys and such but does not tiger it so then i go out and buy a shock senor hook it up the way it said and the same thing. so then i tested the wire on the alarm and it grounds fine with a test light when armed.

kgreene

Member - Posts: 2

Joined: January 04, 2010

Location: Georgia, United States

Posted: January 04, 2010 at 5:42 PM / IP Logged

My question is what could cause the senors not to set off the alarm and what are some things i could do to check?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

add on senors not setting off alarm.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.