the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

finding a good amp


Post ReplyPost New Topic
< Prev Topic Next Topic >
mastermindz 
Copper - Posts: 70
Copper spacespace
Joined: December 17, 2009
Location: California, United States
Posted: January 11, 2010 at 1:31 AM / IP Logged  
I'm lookin for a new amp for my vocals, i have a Pioneer TS-D1720C in front with two pair of Pioneer TS-A6993R, they total 440 rms and 2360 max, i want an amp that can push these speakers to their max, any suggestions? thanks
haemphyst 
Platinum - Posts: 5,053
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: January 11, 2010 at 7:26 PM / IP Logged  
First: Ummm.... 2300 watts? For a 6by? BS! I have no idea WHERE that number came from, it's completely made up.
Those are 440 watts peak. 2-80 watts. Anything in that range will be fine.
Second: Why do you think you have to push them to their max? No need, and no benefit beyond 50 watts (real world watts, not Audiobahn watts...) or so.
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
mastermindz 
Copper - Posts: 70
Copper spacespace
Joined: December 17, 2009
Location: California, United States
Posted: January 12, 2010 at 2:35 AM / IP Logged  
So what would be the best way to wire these 6 speakers to a 4 channel amp?
Mastermindz
haemphyst 
Platinum - Posts: 5,053
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: January 12, 2010 at 10:47 AM / IP Logged  
Parallel the fronts for a 2-ohm load, and run the rears as-is. If you only want loud, you're gonna be golden, but for SQ, you're going to start fresh, with new speakers - and NOT 6X9s - and only run one set up front.
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
mastermindz 
Copper - Posts: 70
Copper spacespace
Joined: December 17, 2009
Location: California, United States
Posted: January 12, 2010 at 4:29 PM / IP Logged  

I'm sorry, i think i described my system wrong, i have the Pioneer TS-D1720C in front with a total of 120 watts RMS and 520 watts max for the front, and then in the rear i have two pair of Pioneer TS-A6993R with a total of 320 watts RMS and 1840 watts max, for a total of 440 watts RMS, and 2360 watts max for all speakers, so what would your suggestions be for wiring and amp? thanks

Mastermindz

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 6, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer