the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

jeep patriot key sense


Post ReplyPost New Topic
< Prev Topic Next Topic >
cunferferth 
Member - Posts: 12
Member spacespace
Joined: January 07, 2010
Posted: January 16, 2010 at 4:04 PM / IP Logged  
no ignition goes to module and vehicle
cunferferth 
Member - Posts: 12
Member spacespace
Joined: January 07, 2010
Posted: January 16, 2010 at 4:09 PM / IP Logged  
also the diagram for the anit grind/starter kill shows i cut the starter wire to wire it in...so i wire it in on the violet/brown mux wire along with the module?
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: January 16, 2010 at 4:33 PM / IP Logged  
Absolutely not! Do not cut the mux wire. It is not a starter wire, it's a data wire. If you want to hook up the kill relay you will have to go under the hood, yellow gray wire in module on drivers side.
Mike M2
Tech Manager
CS Dealer Services
cunferferth 
Member - Posts: 12
Member spacespace
Joined: January 07, 2010
Posted: January 16, 2010 at 4:39 PM / IP Logged  
I have to cut the mux wire for the installation of the module...i have to hook the violet/white wire to the BCM side and the violet wire to the key side
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 16, 2010 at 5:07 PM / IP Logged  
cunferferth wrote:

ok to double check here..  remote start: main power connector: 12V ACC goes to nothing, 12V starter goes to module, 12V ignition goes to module, Ground to vehicle, constant to vehicle, parking lights to vehicle

Looking at diagram B on the installation sheet shows that there are (4) connections from the remote starter to the module. DISARM, IGNITION, GWR & STARTER. The starter has to be connected to the vehicle harness too ( **** IF THE CAR HAS A STARTER WIRE ***** ). I have not installed this module before but it does state to CUT the MUX wire and wire to the VIOLET and the VIOLET/WHITE wire at the module. Depending on if your remote starter requires an ignition ON/OFF confirmation, you will also need to connect the IGNITION wire from the vehicle to the remote starter as well as the PINK wire from the module.

Also as stated before you will need to hook up the 12 volt constant and the ground to the remote starter.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
cunferferth 
Member - Posts: 12
Member spacespace
Joined: January 07, 2010
Posted: January 16, 2010 at 6:21 PM / IP Logged  
the start coming off the remote start goes straight into a relay.. this is for the antigrind...should i run the output of the relay to my module being that my vehicle doesnt have a starter wire
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer