viper 5901 in 2008 toyota fj cruiser

Home / the12volt's Install Bay / Car Security and Convenience / viper 5901 in 2008 toyota fj cruiser (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

rcavictor

Member - Posts: 35

Joined: January 26, 2010

Location: Quebec, Canada

Posted: January 28, 2010 at 3:48 PM / IP Logged

Hello friends ,

When you look at rear of fusebox , there are 4 blue relays , nearby plugs like in front of box .

Are they related to BECU ?

Thanks for answering, rcavictor.

Back to Top

moonliter

Copper - Posts: 322

Joined: February 28, 2007

Location: Canada

Posted: January 28, 2010 at 4:22 PM / IP Logged

viper 5901 in 2008 toyota fj cruiser - Page 2 - Last Post -- posted image.

This is the same wire but it is much more easy to work on. Put dmm on dcv, pos lead to 12v constant and probe the purple / YELLOW with neg lead of your dmm. Should read +12v on meter if any of the doors is open. 0 volt when all doors are closed.

Back to Top

rcavictor

Member - Posts: 35

Joined: January 26, 2010

Location: Quebec, Canada

Posted: January 28, 2010 at 4:36 PM / IP Logged

Hello friends .

Thank you moonliter , you are a fast replyer .

It is on the head of instrument cluster . Will be easier for me at 56 .

Is there any other helpful picture ?

Thanks again .............

Thanks for answering, rcavictor.

Back to Top

rcavictor

Member - Posts: 35

Joined: January 26, 2010

Location: Quebec, Canada

Posted: January 30, 2010 at 4:26 PM / IP Logged

moonliter wrote:

viper 5901 in 2008 toyota fj cruiser - Page 2 - Last Post -- posted image.

This is the same wire but it is much more easy to work on. Put dmm on dcv, pos lead to 12v constant and probe the purple / YELLOW with neg lead of your dmm. Should read +12v on meter if any of the doors is open. 0 volt when all doors are closed.

Hello friends ,

Thanks again moonliter .........

I was looking at this plug with magnifying goggle . And I saw BLACK/ white (?tach?) and GREEN/ YELLOW (?keysense?) .

Would you send confirmation ?

Thanks for answering, rcavictor.

Back to Top

moonliter

Copper - Posts: 322

Joined: February 28, 2007

Location: Canada

Posted: January 30, 2010 at 5:41 PM / IP Logged

viper 5901 in 2008 toyota fj cruiser - Page 2 - Last Post -- posted image.

Location of tach wire, if you find another wire at the instrument cluster (same color) and tested as such then use it. You don't have to hook up the keysense if this truck doesn't have factory alarm. The keysense wire GREEN/ YELLOW (-) is at the ignition switch harness. Before hook them up, always check first !

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5901 in 2008 toyota fj cruiser

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.